12.11.3. Configuring reverse proxy servers

You configure reverse proxy servers at the global-portal reverse-proxy-servers level.

To create a reverse proxy server, use the following command:

Admin@UGOS# create global-portal reverse-proxy-servers

Available parameters:

Parameter

Description

name

Reverse proxy server name.

description

Reverse proxy server description.

address

Reverse proxy server address or domain.

port

Reverse proxy server TCP port.

https

Use HTTPS protocol for the server being published:

  • on: enabled.

  • off: disabled.

check-cert

Check the validity of the SSL certificate used on the server being published:

  • on: check.

  • off: do not check.

keep-source-ip

Use the original source IP address in packets forwarded to the server being published:

  • on: keep the original source IP address.

  • off: substitute the source IP address with the UserGate IP address.

To update reverse proxy server parameters, use the following command:

Admin@UGOS# set global-portal reverse-proxy-servers <server-name>

The parameters available to update are the same as those used to create a name server.

To delete a server, use the following command:

Admin@UGOS# delete global-portal reverse-proxy-servers <server-name>

To display information about a reverse proxy server, use the following command:

Admin@UGOS# show global-portal reverse-proxy-servers <server-name>