To set NGFW as a slave node, use this command:
Admin@nodename# execute install slave
Specify the following parameters:
|
Parameter |
Description |
|---|---|
|
interface |
The interface for connecting to the cluster. |
|
slave-ip |
The IP address that will be assigned to the interface used for connecting to the cluster. |
|
gateway-address |
Gateway IP address. A gateway is required if the nodes are in different subnets. |
|
master-ip |
The master node IP address. |
|
master-secret |
The master node secret used to connect the node to the cluster. |
|
login |
The NGFW administrator login. |
|
password |
The password for the administrator account. |