Device management

The Device management section is used to configure the basic LogAn settings:

  • Diagnostics

  • Server operations

  • Backup

  • Settings export and import

Diagnostics

This section contains the server diagnostics settings that LogAn technical support will need to resolve eventual problems.

Name

Description

Diagnostic details

  • Off: diagnostics logs are disabled

  • Error: log only server errors

  • Warning: log only errors and warnings

  • Info: log only errors, warnings, and additional information

  • Debug: provide as much detail as possible

It is recommended to set Diagnostic details to Error (errors only) or Off (disabled), unless UserGate technical support asked you to set different values. Any values other than Error (errors only) or Off (disabled) will negatively affect LogAn performance.

Diagnostics logs

  • Download logs: download the diagnostic logs for sending them to UserGate support.

  • Clear logs: purge logs of content.

Remote assistance

  • On/Off: enable/disable the remote assistance mode. Remote assistance allows a UserGate support engineer to connect securely to a LogAn server for troubleshooting using the known values of the Remote assistance ID and token. For a successful activation of remote assistance, LogAn must have SSH access to the UserGate remote assistance server.

  • Remote assistance ID: a randomly generated value that is unique for each remote assistance session. that is unique for each remote assistance session.

  • Remote assistance token: a randomly generated token value. that is unique for each remote assistance session.

Server operations

In this section, you can perform the following server maintenance actions:

Name

Description

Server operations

  • Reboot: reboot the LogAn server

  • Shutdown: shutdown the LogAn server

Updates channel

Here you can select the update channel for LogAn software:

  • Stable: check for stable software updates and download them (if any)

  • Beta: check for experimental updates and download them (if any)

Server updates

Displays available UserGate server updates.

Starts the server update process and allows to create a restore point.

View a changelog for the update.

Offline updates

Download a file for offline updates.

Upstream proxy settings to check licenses and updates

Configure the upstream HTTP(S) proxy server settings for license and software updates for the UserGate server.

You must specify the IP address and port of the upstream proxy server. If necessary, specify login and password for authentication on the upstream proxy server.

The UserGate company is continuously working to improve its software and provides LogAn product updates as part of the Security Update license module subscription (for more details on licensing, see the chapter SIEM Licensing). If there are any updates, a notification to that effect will display in the Device management section. As a product update can take quite a while, it is recommended to account for the potential LogAn downtime when planning update installation.

To install updates, follow these steps:

Name

Description

Step 1. Create a backup file.

Создать резервную копию состояния LogAn, как это описано в разделе Системные утилиты. This step is always recommended before applying updates because it will allow you to restore the previous state of the device, should any problems arise during the update process.

Step 2. Install the updates.

In the Device management section, if the New updates available notification is present, click Install now. The system will install the downloaded updates, and when the installation completes, LogAn will reboot.

System backup management

This section allows you to manage UserGate backups, i.e. to set backup export rules, to create a backup, and to restore a UserGate device.

To create a backup, follow these actions:

Name

Description

Step 1. Create a backup

Under Device management ➜ System backup management, click Create backup. The system will save the current server settings in a file named:

backup_PRODUCT_NODE-NAME_DATE.gpg, where

PRODUCT is the product type: NGFW, LogAn, or MC;

NODE-NAME is the UserGate node name;

DATE is the date and time when the backup was created as YYYY-MM-DD-HH-MM. The time is in UTC time zone.

To interrupt the backup process, press the Stop button. The backup record will be displayed in the device event log.

To restore the device status, follow these steps:

Name

Description

Step 1. Restore the device state

In the Device management ➜ System backup management, click Restore from backup and specify the path to the previously created settings file to upload it to the server. Restore will be suggested in the tty console when the device reboots.

In addition, the administrator can configure a scheduled file upload to external servers (FTP, SSH). To create a schedule for uploading settings, follow these steps:

Name

Description

Step 1. Create a backup export rule

In the Device management ➜ System backup management, click Add and enter a name and description for the rule.

Step 2. Specify the remote server parameters

In the Remote server tab of the rule, specify the parameters for the remote server:

  • Server type: FTP or SSH

  • Address: the server's IP address

  • Port: the server's port

  • Login name: the user account on the remote server

  • Password/Repeat password: the password for the user account

  • Directory path: the path on the server where the settings will be uploaded

If using an SSH server, you can use key authorization. To import or generate a key, select SSH key setup and specify Generate key or Import key.

Important! If you re-create a key, the existing SSH key will be deleted. The public key must reside on the SSH server in the user keys directory /home/user/.ssh/ in the authorized_keys file.

When initially configuring the SSH backup export rule, connection verification is mandatory (Check connection button). When the connection is verified, the fingerprint is placed in known_hosts. The files are not sent without verification.

Important! If you change the SSH server or reinstall it, the backup files will be unavailable, because the fingerprint has changed. This protects you from spoofing.

Step 3. Select the upload schedule

In the Schedule tab of the rule, specify when the settings should be uploaded. If specifying the time in the crontab-format, enter it as follows:

(minutes: 0-59) (hours: 0-23) (days of the month: 1-31) (month: 1-12) (days of the week: 0-6, where 0 is Sunday)

Each of the first five fields can be defined using:

  • An asterisk (*) denotes the entire range (from the first number to the last).

  • A dash (-) denotes a number range. For example, "5-7" means 5, 6, and 7.

  • Lists: comma-separated numbers or ranges. For example, "1,5,10,11" or "1-11,19-23".

  • The asterisk and dash are also used for spacing out values in ranges. The increment is given after a slash. Examples: "2-10/2" means "2,4,6,8,10" while "*/2" in the "hours" field means "every two hours".

Exporting and importing settings

The administrator can save the current LogAn settings in a file and later restore them on the same or another LogAn server. This is different from a backup in that importing/exporting the settings does not preserve the current state of all system components --- only the current settings are saved.

Note Importing/exporting the settings does not preserve the interface state or license information. After completing the import, you will need to re-register LogAn using the existing PIN code and configure the interfaces.

To export the settings, follow these steps:

Name

Description

Step 1. Export the settings.

Under Device management ➜ Settings export and import, click Export and select Export all settings or Export network settings. The system will save:

  • the current server settings in a file named:

    logan_core-logan_core@nodename_version_YYYYMMDD_HHMMSS.bin

  • the network settings in a file named:

    network-logan_core-logan_core@nodename_version_YYYYMMDD_HHMMSS.bin

nodename is the LogAn node name

version is the LogAn version.

YYYYMMDD_HHMMSS is the date and time of the settings export in the UTC timezone.

Examples: logan_core-logan_core@ranreahattha_6.2.0.13494RS-1_20211227_091350.bin; network-logan_core-logan_core@ranreahattha_6.2.0.13494RS-1_20211227_091407.bin.

To apply the exported settings, follow these steps:

Name

Description

Step 1. Import the settings.

In the Device managementSettings export section, click or tap Import, and browse to the path of the settings file created earlier. The settings will be applied to the server, after which the server will reboot.

In addition, the administrator can configure a scheduled settings upload to external servers (FTP, SSH). To create a schedule for uploading settings, follow these steps:

Name

Description

Step 1. Create an export rule.

Under Device management ➜ Settings export and import, click Add and enter a name and description for the rule.

Step 2. Specify the remote server parameters.

In the Remote server tab of the rule, specify the parameters for the remote server:

  • Server type: FTP or SSH

  • Address: the server's IP address

  • Port: the server's port

  • Login name: the user account on the remote server

  • Password/Repeat password: the password for the user account

  • Directory path: the path on the server where the settings will be uploaded

Step 3. Select the upload schedule.

In the Schedule tab of the rule, specify when the settings should be uploaded. If specifying the time in the CRONTAB format, enter it as follows:

(minutes: 0-59) (hours: 0-23) (days of the month: 1-31) (month: 1-12) (days of the week: 0-6, where 0 is Sunday)

Each of the first five fields can be defined using:

  • An asterisk (*) denotes the entire range (from the first number to the last).

  • A dash (-) denotes a number range. For example, "5-7" means 5, 6, and 7.

  • Lists: comma-separated numbers or ranges. For example, "1,5,10,11" or "1-11,19-23".

  • The asterisk and dash are also used for spacing out values in ranges. The increment is given after a slash. Examples: "2-10/2" means "2,4,6,8,10" while "*/2" in the "hours" field means "every two hours".