A RADIUS server is configured at the users auth-servers radius level.
To create a RADIUS auth server, use the following command:
Admin@nodename# create users auth-server radius <parameter>
Provide the following parameters:
|
Parameter |
Description |
|---|---|
|
name |
The RADIUS server name. |
|
enabled |
Enable/disable the auth server. |
|
description |
Auth server description. |
|
secret |
Pre-shared key used by the RADIUS protocol for authentication. |
|
addresses |
IP address and the UDP port on which the RADIUS server listens to requests (default port: 1812). Format: <ip:port>. |
To update information about a RADIUS server, use the following command:
Admin@nodename# set users auth-server radius <radius-server-name> <parameter>
The parameters you can update are the same as those used to create an auth server.
To display information about a RADIUS server, use the following command:
Admin@nodename# show users auth-server radius <radius-server-name>
Example commands to create and edit a RADIUS server:
Admin@nodename# create users auth-server radius name "New RADIUS server" addresses [ 10.10.0.9:1812 ] secret 12345 enabled on Admin@nodename# show users auth-server radius "New RADIUS server" name : New RADIUS server enabled : on addresses : host : 10.10.0.9 port : 1812 Admin@nodename# set users auth-server radius "New RADIUS server" description "New RADIUS server description" Admin@nodename# show users auth-server radius "New RADIUS server" name : New RADIUS server description : New RADIUS server description enabled : on addresses : host : 10.10.0.9 port : 1812
To delete a server, use the following command:
Admin@nodename# delete users auth-server radius <radius-server-name> <parameter>
You can also delete individual parameters of a RADIUS server. You can delete the following parameters:
-
addresses