Some server maintenance operations are carried out when the server is not running and is offline. To perform such operations, select Support menu when the server is booting and then select the desired operation. To access this menu, connect a monitor to a VGA (HDMI) port and a keyboard to a USB port (if these ports exist on the device) or use a special serial cable or a USB-Serial adapter to connect your computer to LogAn. Launch a terminal that supports connecting via a serial port, e.g. Putty for Windows. Establish a serial port connection using 115200 8n1 as the connection parameters.
During the boot process, the administrator can select from the following boot menu options:
|
Name |
Description |
|---|---|
|
UGOS LOGAN |
Boot UserGate and output diagnostic information about the boot process to the serial port. |
|
UGOS LOGAN (failsafe) |
Boot UserGate in simplified video mode. |
|
Support menu |
Enter the system utilities section and send output to tty1 (the monitor). |
|
Restore previous version |
This section is available after updating or creating a system backup. |
The system utilities (Support menu) section offers the following actions:
|
Name |
Description |
|---|---|
|
Check filesystems |
Start a file system check on the device with automatic error correction. |
|
Expand data partition |
Expand the data partition to use the entire allocated disk space. This operation is usually carried out after increasing the amount of disk space allocated by the hypervisor to the UserGate VM. UserGate data and settings are not reset. |
|
Create backup |
Create a full backup of the UserGate disk on an external USB medium. All existing data on the external medium will be deleted. |
|
Restore from backup |
Restore UserGate from an external USB drive. |
|
Factory reset |
Reset UserGate to its original system state. All data and settings will be lost. |
|
Exit |
Log out and reboot the device. |