You can authorize users in the UserGate administrative console using a TACACS+ authentication server. In this case, UserGate transmits the username and password information to the auth servers, and then the TACACS+ servers respond as to whether the authentication was successful.
To add a TACACS+ authentication server, click Add, select Add TACACS+ server, and provide the following settings:
|
Name |
Description |
|---|---|
|
Enabled |
Enables or disables the use of this authentication server. |
|
Name |
The name of the TACACS+ authentication server. |
|
Description |
An optional description of the server. |
|
Secret |
Pre-shared key used by the TACACS+ protocol for authentication. |
|
Address |
The IP address for the TACACS+ server. |
|
Port |
The UDP port on which the TACACS+ server listens for authentication requests. |
|
Use single TCP connection |
Use a single TCP connection for communicating with the TACACS+ server. |
|
Timeout (sec.) |
The authentication timeout for the TACACS+ server. The default is 4 seconds. |
To authorize users in UserGate's web interface using a TACACS+ server, you need to configure an authentication profile. For more details on creating and configuring profiles, see the section UGMC Authentication Profiles.