The Interfaces section displays all physical and virtual network interfaces existing in the system and allows you to modify their settings as well as add VLAN and bond interfaces.
Using the Edit button, you can modify the settings for a network interface:
-
Enable or disable the interface.
-
Specify the interface type as Layer 3.
-
Assign a zone to the interface.
-
Modify the physical parameters of the interface, such as the MAC address and MTU size.
-
Select the IP address assignment type: no address, a static IP address, or a dynamic IP address obtained using DHCP.
Using the Add button, you can add the following logical interface types:
-
VLAN.
-
Bond.