In this section, you can specify a route to the network available through a certain router. This can be useful when several IP subnets in your local network are integrated via a local router. A route is applied only to the cluster's node where it has been created.
To add a new route, perform the following steps:
|
Name |
Description |
|---|---|
|
Step 1. Select a node in your cluster |
If using cluster, select a node in which you want to create a new route from the drop-down menu. |
|
Step 2. Specify a name and description for a given route |
Provide a name for a given route. Provide an optional description for a given route. |
|
Step 3. Specify the Destination |
Specify a destination subnet for the new route, e.g. 172.16.20.0/24 or 172 .16.20.5/32 |
|
Step 4. Specify the Gateway |
Provide the IP address of the gateway through which the specified subnet should be accessible. This IP address must be accessible from the UserGate server. |
|
Step 5. Specify an Interface |
Select an interface to which you want to add a new route. |
|
Step 6. Specify Metric |
Specify metrics for the new route. If you have multiple routes, then the routes with lower metrics will have higher priorities. |